Snap Buckling of a Delaminated Layer in a Composite Cylinder
We investigate snap buckling of a thin delaminated layer on the inner surface of a contracting thick cylinder. Finite-deflection solutions of the layer with or without considering the...
Spacecraft Wall Design for Orbital Debris Impact
This paper describes a method for obtaining the optimal rise angle of corrugated bumpers for the design of space structures in the event of an on-orbit impact. The procedure determines...
Distributional Information for Ejection Fragments
Due to lack of experience of building structures on the lunar surface and the variability that will exist in the loading as well as the structural resistance, it is suggested that initial...
Preserve and Protect
Historic and landmark structures constructed of unreinforced masonry and stone are among the most vulnerable to strong ground shaking and are often subject to possible collapse. For the...
Design of Mat Foundation for Egg Shape Digesters
Two levels of ground motion, the Maximum Probable Earthquake and the Maximum Credible Earthquake, were considered in designing the 2.5 million gallon egg shape digesters and their combined...
Concrete Buildings in Regions of High Seismicity
Structural systems for multistory concrete buildings in regions of high seismicity are reviewed. The suitability and certain practical aspects of the systems are discussed. A Uniform Building...
Seismic Design of RC Structural Walls with Unsymmetrical Cross-Sections
An overview of seismic design issues and current experimental research for walls with unsymmetrical cross-sections is presented. The experimental studies include approximately 1/4 and...
U.S. / Japan Large Scale Cooperative Research Program for Steel Structures
The US/Japan Cooperative Research Program Utilizing Large Scale Test Facilities for Earthquake Resistant Design was initiated in 1980 using a combination of full-scale, small-scale, subassemblage...
Impediments to the Implementation of Seismic Isolation
There are over 400 civil engineering structures, worldwide, that have been constructed using the principles of seismic isolation, and 70 of these are in the United States. Although use...
First Bank Place: A Composite Cruciform Spine
The First Bank Place, designed by the internationally known architectural firm of Pei Cobb Freed and Partners, is a granite-clad, 56 stories tall building in downtown Minneapolis. Presented...
Composite Walls as Shear Elements in Tall Structures
This paper describes a system of composite walling that can be used as a lateral load resisting system in tall structures. The composite walling comprises two skins of profiled steel sheeting...
Application of Concrete-Filled Steel Tubular Columns in Tall Buildings in Earthquake Area
In this paper an outline is given of the background, the design concept, structural features, construction and economy of the concrete-filled steel tubular coumns of tall buildings in...
Talmadge Bridge Replacement
This paper discusses the design of the main spans and approach spans for the replacement of the Talmadge Bridge for the Georgia Department of Transportation. The design of the concrete...
Strut-Tie Model Design of Disturbed Regions in Concrete Structures
The design of disturbed (highly non-linear behavior) regions in concrete structures is illustrated using strut-tie approach. The use of this approach assisted with interactive computer...
Behavior of RC Beams under Sustained Load
Experimental results of eight reinforced concrete beams under 3-month's sustained load, with the ratio of shear span to depth equal to 2.5, are reported. It is shown by tests that the...
Overweight Trucks and Safety of Bridges
Most states face increasing pressure to issue more and heavier overweight truck permits. Current permit checking methods of many states adopt the AASHTO rating concept with or without...
Multimedia Technology and Structural Steel Design
A project is underway at The Pennsylvania State University to produce Steel Design Educational Module (SteelDEM) software. This intelligent tutor and teaching aid utilizes the state-of-the-art...
Seismic Performance of Railway Bridges
Historically, the seismic performance of railway bridges in the U.S.A. has been very satisfactory during earthquakes of this century. There are many possible factors contributing to this...
Seismic Study of Historic Bridges in Eastern United States
The main objective of this paper is to study the Barrackville bridge and its response in resisting static and seismic loads. Since the design was based on controlled deflections, the analyses...
SemiActive Structural Control: A Low Cost Fix for An Infrastructure at Risk
There is increasing societal pressure on the engineering profession to develop cost effective methods to extend the service life of the civil infrastructure. While the degradation of the...
Return to search